Vehicle Tool Kit; Vehicles With Moextended Tires (Tires With Run-Flat Characteristics); Vehicles With A Tirefit Kit; Useful Information - Mercedes-Benz C-Class Operator's Manual

Where will I find...?

340

Useful information

i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (
Where will I find...?

Vehicle tool kit

General notes
The towing eye is located in the stowage well
under the trunk floor.
In vehicles with MOExtended tires (tires with
run-flat characteristics) the towing eye is
located in a bracket under the parcel shelf.
Apart from certain country-specific varia-
tions, the vehicles are not equipped with a
tire-change tool kit. Some tools for changing
a wheel are specific to the vehicle. For more
information on which tire changing tools are
required and approved to perform a wheel
change on your vehicle, consult a qualified
specialist workshop.
Tools required for changing a wheel may
include, for example:
Jack
R
Wheel chock
R
Lug wrench
R
Ratchet wrench
R
Alignment bolt
R
page 26).
Y

Vehicles with a TIREFIT kit

(Example)
Tire inflation compressor
:
Tire sealant filler bottle
;
Towing eye
=
Open the trunk lid.
X
Lift the trunk floor upwards (
X
Use the TIREFIT kit (
X
Vehicles with MOExtended tires (tires
with run-flat characteristics)
Towing eye
:
To remove the towing eye: open the trunk
X
lid.
Pull towing eye : to the left and remove it.
X
To replace the towing eye: slide towing
X
eye : with the thread into the rear end of
the bracket.
Push towing eye : on the eyelet towards
X
the right until it engages in the bracket.
page 305).
Y
page 342).
Y