Checking Coolant Level; Adding Washer Fluid To The Windshield Washer System - Mercedes-Benz C-Class Operator's Manual

C-class
Hide thumbs Also See for C-Class:
Table of Contents

Advertisement

Replace cap : on the filler neck and turn
X
clockwise.
Ensure that the cap locks into place
securely.
Check the oil level again with the oil dip-
X
stick (
page 325).
Y
Further information on engine oil
(
page 400).
Y
Additional service products

Checking coolant level

WARNING
G
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
WARNING
G
The engine cooling system is pressurized, par-
ticularly when the engine is warm. When
opening the cap, you could be scalded by hot
coolant spraying out. There is a risk of injury.
Let the engine cool down before opening the
cap. Wear eye and hand protection when
opening the cap. Open the cap slowly half a
turn to allow pressure to escape.
Park the vehicle on a level surface.
X
Engine compartment
Only check the coolant level when the vehi-
cle is on a level surface and the engine has
cooled down.
Turn the SmartKey to position 2 in the igni-
X
tion lock (
page 157).
Y
or
On vehicles with KEYLESS-GO, press the
X
Start/Stop button twice (
Check the coolant temperature display in
X
the instrument cluster.
The coolant temperature must be below
158 ‡ (70 †).
Turn the SmartKey to position
X
0 (
page 157) in the ignition lock.
Y
or
On vehicles with KEYLESS-GO, pull the
X
Start/Stop button from the ignition lock
(
page 157).
Y
Slowly turn cap : half a turn counter-
X
clockwise to allow excess pressure to
escape.
Turn cap : further counter-clockwise and
X
remove it.
If the coolant is at the level of marker bar =
in the filler neck when cold, there is enough
coolant in coolant expansion tank ;.
If the coolant level is approximately 0.6 in
(1.5 cm) above marker bar = in the filler
neck when warm, there is enough coolant
in expansion tank ;.
If necessary, add coolant that has been tes-
X
ted and approved by Mercedes-Benz.
Replace cap : and turn it clockwise as far
X
as it will go.
For further information on coolant, see
(
page 401).
Y
Adding washer fluid to the windshield
washer system
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
327
page 157).
Y
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C 300C 300 4maticC 400 4matic

Table of Contents