Stowage Well Under The Trunk Floor - Mercedes-Benz C-Class Operator's Manual

Adjusting the height to any position
Example
Pull the box out by handle : in the direc-
X
tion of the arrow all the way to the stop.
Lowering the load surface: push the cen-
X
ter of load surface ; down by hand in the
direction of the arrow until load surface ;
has reached the desired position and the
box is the desired size.
To raise the load surface: press switch
X
=.
Load surface ; of the box moves up auto-
matically.
To stow the box: push the box in by han-
X
dle : all the way to the stop.
Removing and installing
Example
To install: insert retainer ; of box : into
X
slots =
Raise box : and press hooks A into
X
anchorage ? as far as they will go.
Turn left-hand rotating catch B counter-
X
clockwise and right-hand rotating catch B
clockwise by 90°.
To remove: turn left-hand rotating catch
X
B clockwise and right-hand rotating catch
B counter-clockwise by 90°.
Move box : downwards and pull it out
X
from anchorages ?.
Store the EASY-PACK trunk box on a flat sur-
face after removal, e.g. on a suitable shelf.

Stowage well under the trunk floor

! Unhook the handle before again before
closing the trunk lid and clip it in securely to
prevent the handle flap from protruding.
Otherwise, you could damage the handle.
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
To open: pull handle : up.
X
Stowage areas
Z
305