General Description; Ordering Information - GE NetworX NX-6 Installation And Startup

Networx series

User manual (20 pages)

Table of Contents

The NetworX NX-6 represents a new approach to security systems design. Drawing on our experience in the world

market as the largest exporter of USA manufactured controls, we have developed the most flexible, durable, and user-

friendly control ever seen in our industry. Featuring sophisticated software which allows up to 40 users to interface with

16 zones, 2 partitions, and a host of integrated fire, access, verification, and input/output modules, all reported with the

most comprehensive and fast SIA and Contact ID formats. The NetworX design allows a fully loaded system to be

housed in one single metal enclosure, establishing for the first time, a logical solution and design response to modular

systems. Up to 3 modules can be added to expand the capabilities of the NX-6. Warranty information is provided in the

GE Security Product Catalog.

Part #

NX-6-KIT

NX-6

NX-108E

NX-116E

NX-124E

NX-148E

NX-1192E

NX-1208E

NX-1248E

NX-1308E

NX-1316E

NX-1324E

NX-1448E

NX-200 **

NX-320E

NX-408E #

NX-416E #

NX-508E

NX-534E **

NX-540E**

NX-591E **

** These products have not been tested and approved by Underwriters Laboratories, Inc.

# These wireless devices are only UL listed for residential applications.

IMPORTANT NOTES:

The maximum number of zones available is 16 regardless of the devices added. Information regarding zone

doubling is located on page 7.

The 2-wire smoke option is automatically selected when Zone 7 is programmed as a AFire@ Zone Type. Refer to

the Standard Zone Type chart on page 18. If Zone 7 is used as wireless AFire@ zone, the resistor must be placed

on the 2-wire smoke loop. See diagram and terminal descriptions on pages 40 and 41.

Page 2