GE NetworX NX-6 Installation And Startup page 28

LOCATION 76 LOG FULL
Location 76 contains the tens and ones digits for a 4+2 format if the "Log Full Reporting" is enabled. Segment 1 contains
the tens digit, segment 2 contains the ones digit.
LOCATION 77 OPENING
Location 77 contains the tens digit of a 4+2 format if the "Opening Reporting" is enabled. The ones digit is the ones
digit of the user number that did the opening. If the user is greater than 9, the numbers will begin repeating.
If it is required to report openings and closings for more than 9 users, Contact ID or SIA format must be used. Any
segment left as "0" will follow the Segment 1 selection.
Segment 1 = Partition #1 Opening Code
LOCATION 78 CLOSING
Location 78 contains the tens digit of a 4+2 format if the "Closing Reporting" is enabled. The ones digit is the ones
digit of the user number that did the closing. If the user is greater than 9, the numbers will begin repeating.
If it is required to report openings and closings for more than 9 users, Contact ID or SIA format must be used. Any
segment left as "0" will follow the Segment 1 selection.
Segment 1 = Partition #1 Closing Code
LOCATION 79 AUTOTEST
Location 79 contains the tens and ones digits for a 4+2 format that will be sent if the "Autotest" or "Manual Test" is
enabled. Segment 1 contains the tens digit segment 2 contains the ones digit.
LOCATION 80 RECENT CLOSING & EXIT ERROR
Location 80 contains the tens digit for a 4+2 format that will be sent if "Recent Closing" and/or "Exit Error Reporting" is
enabled. Segment 1 contains the tens digit for the "Recent Closing Reporting". Segment 2 contains the digit for the
"Exit Error Reporting". The ones digit is the ones digit of the user who closed. If the user number is greater
than 9, the numbers will begin repeating (i.e. 9 for user 29). If it is required to report Recent Closings and Exit
Errors for more than 9 users, Contact ID or SIA format must be used.
LOCATION 81 START & END PROGRAM
Location 81 contains the tens and ones digits for a 4+2 format that will be sent if "Start / End Programming Reporting" is
enabled. Segment 1 contains the tens digit of the "Start Program Reporting". Segment 2 contains the ones digit of the
"Start Program Reporting". Segment 3 contains the tens digit of the "End Program Reporting". Segment 4 contains the
ones digit of the "End Program Reporting".
LOCATION 82 END DOWNLOAD
Location 82 contains the tens and ones digits for a 4+2 format that will be sent if "End Downloading Reporting" is
enabled. Segment 1 and 2 are reserved. Segment 3 contains the tens digit of the "End Download Reporting". Segment
4 contains the ones digit of the "End Download Reporting". NOTE: A start download report will be sent to the
internal event log.
LOCATION 83 CANCEL
Location 83 contains the tens digit for a 4+2 format that will be sent if "Cancel Reporting" is enabled. Segment 1
contains the tens digit for the "Cancel Communicator Reporting". The ones digit is the ones digit of the user who
canceled. If the user number is greater than 9, the numbers will begin repeating (i.e. 9 for user 29). If it is
required to report Cancels for more than 9 users, Contact ID or SIA format must be used.
Page 26
Segment 2 = Partition #2 Opening Code
Segment 2 = Partition #2 Closing Code
2 segments, numerical data
2 segments, numerical data
2 segments, numerical data
2 segments, numerical data
2 segments, numerical data
4 segments, numerical data
4 segments, numerical data
1 segment, numerical data