Tyre Pressure Monitoring - Skoda Roomster Owner's Manual

Hide thumbs Also See for Roomster:
Table of Contents

Advertisement

Error: Start-Stop
ERROR START-STOP
A system error is present. Seek help from a specialist garage.

Tyre pressure monitoring

Introduction
This chapter contains information on the following subjects:
Save tyre pressure values
The tyre pressure monitoring function (hereinafter referred to only as a sys-
tem) monitors the tyre pressure while driving.
If the rolling circumference of a wheel is changed, the indicator light
instrument cluster lights up and an audible signal sounds.
Information on the procedure for the notification of change of tyre inflation
pressure
» page
45.
The system can only function properly if the tyres have the prescribed inflation
pressure and this pressure values are stored in the system.
WARNING
The driver is always responsible for the tyre inflation pressure. Tyre pres-
sure should be checked regularly
The system cannot warn in case of very rapid loss of tyre pressure, e.g. in
the event of a sudden puncture.
Save tyre pressure values
» page
157.
Fig. 122
Key for storing the pressure val-
ues
Read and observe
Saving the tyre pressure values is undertaken as follows.
Inflate all the tyres to the specified pressure.
Switch on the ignition.
Press the 
» Fig. 122
The warning light
An acoustic signal and the control indicator provide information about the
storage of the tyre pressure values.
125
Release the  icon button.
The tyre pressure values are always stored in the system, if one of the follow-
ing events occurs.
in the
Change of tyre inflation pressure.
Changing one or more wheels.
Changing position of a wheel on the vehicle.
Illumination of the warning light
WARNING
Before storing the pressures, the tyres must be inflated to the specified in-
flation pressure
system could possibly not issue any warnings, even with a too low tyre
pressure.
CAUTION
The tyre pressure values are to be saved every 10,000 km or 1x annually to en-
sure correct system functioning.
on page 125 first.
symbol icon and hold down.
in the instrument cluster lights up.
in the instrument cluster.
» page
157. When storing incorrect pressure values, the
125
Assist systems

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents