Fog light, Roomster Scout
Fig. 167 Front bumper: Fog lights/fog lights: Replacing the light bulb
Read and observe
and
Removing the cap and fog light
›
Insert the tool
» page
166, Vehicle tool kit into the opening above the fog
light
» Fig. 166
and remove the cover.
›
Unscrew the screws
» Fig. 167
- with the screwdriver
tool kit.
›
Remove the fog lamp.
Changing light bulbs and installing fog lights
›
Press the locking tab
» Fig. 167
1
nector from the bulb holder
B
›
Turn the bulb holder
and bulb in the direction of the arrow to the stop and
B
remove.
›
Replace the bulb, insert the bulb holder and new bulb and turn in the oppo-
site direction to that of the arrow to the stop.
›
Insert the plug
into the socket
A
Fig. 166
Front bumper: Roomster Scout
on page 178 first.
» page
166, Vehicle
on the connector
and remove the con-
A
.
.
B
›
Retighten the screws and insert the cap. The cap must engage firmly.
Replacing the bulb for the licence plate light
Read and observe
and
›
Open the tailgate and unscrew the glass cover
›
Remove the faulty bulb from the holder and insert a new one.
›
Replace the glass cover and push in until the stop. Make sure that you install
the rubber seal in the right direction.
›
Slightly screw the glass cover.
Rear Light
Fig. 169 Removing the tail light assembly/disconnecting the plug connec-
tion
Fig. 168
Remove the licence plate light
on page 178 first.
» Fig.
168.
Fuses and light bulbs
181