WARNING
Ensure that the carrier rails and variable loading floor are correctly fastened
when installing the variable loading floor. If this is not the case, there is a
risk of injury for the occupants.
Removing/installing the lateral carrier rail and fixing wedges
Fig. 71 Boot: Take out lateral carrier rail/Take out fixing wedges
Read and observe
on page 76 first.
Removing
›
Remove the lateral carrier rail
» Fig. 71
tion of arrow.
›
Remove the mounting wedges by pulling in the direction of the ar-
row
» Fig. 71
- .
Fitting
›
Put the fixing wedge on the fixing points and press in the direction of the
sides of the luggage compartment up to the stop.
›
Insert the lateral carrier rail at an angle to the fixing wedges and press it up
to the stop.
›
Check how well the lateral carrier rail is fastened by pulling on it.
Bicycle carrier in the luggage compartment
Introduction
This chapter contains information on the following subjects:
Install cross member
Install bicycle carrier
78
Operation
- and remove by pulling in the direc-
Put bicycle into the bicycle carrier
Secure the stability of the bicycles with a belt
WARNING
When transporting bicycles, ensuring the safety of the passengers is para-
mount.
CAUTION
Take care handling the bicycle - there is a risk of damaging the vehicle.
Install cross member
Read and observe
and
›
Remove the luggage compartment cover
›
Fold the rear seats forward, remove
›
Undo the securing bolts
.
B
›
Place the cross member
then place it on the left lashing eye with the removable part of the cross
member
.
A
›
Press the holders
until they latch. Tighten the securing screws
B
›
Check how well the cross member is fastened by pulling on it.
78
79
Fig. 72
Install cross member
on page 78 first.
» page
75.
» page
71.
» Fig. 72
and remove a little to unlock the holders
C
with the fixed part onto the right lashing eye and
A
79
79
.
C