Variable Loading Floor In The Luggage Compartment (Estate); Net Partition - Skoda Roomster Owner's Manual

Note
When opening the boot lid, the luggage compartment cover is lifted up at the
same time- risk that objects placed in this area can slip forward!

Net partition

Fig. 67 Using the net partition behind the front/rear seats

Read and observe and
The net partition can either be installed behind the rear seats or behind the
front seats.
Installing the net partition behind the rear seats
›
Remove the boot cover » page
›
Remove the net partition from the bag.
›
Unfold both parts of the cross rod until they are heard to engage.
›
First insert the rod into the mount
wards. In the same way, insert the cross rod into the mount
side of the vehicle.
›
Hang the carabines at the ends of the belt into the lashing eyes behind
C
the rear seats.
›
Pull the belt through the tensioning clasp on both sides- first of all on the
one side and then on the other side.
Removing the net partition
›
Undo the belts on both sides and unhook the carabiners
›
Push the cross rod first of all on the one side and then on the other side to-
wards the rear.
›
Remove the cross rod from the mounts
Packing the net partition
›
Press the red button on hinge
76
Operation
on page 73 first.
75, Boot cover.
» Fig. 67 on one side and push it for-
B
on the other
B
» Fig.
C
.
B
» Fig. 67 - the hinge breaks.
A
›
Put the net partition folded together in the bag and close it.
›
Attach the bag with the aid of the plastic carabines to the eyes on the left
and right boot trim panel.
Installing and removing the net partition behind the rear seats is carried out
in the same way as behind the rear seats. Use the fixing eyes behind the front
seats in order to attach the carabines
rear seats can be removed.
Installing and removing the net partition behind the rear seats with variable
loading floor » page 76
seats without variable loading floor. To attach the carabines
the lower fixing eyes on the fixing wedges in the front area of the variable
loading floor.
The opening in the net partition is designed to pass through the three-
D
point seat belt » page

Variable loading floor in the luggage compartment (Estate)


Introduction
This chapter contains information on the following subjects:
Dividing up the luggage compartment with variable loading floor
Removing and refitting the variable loading floor
Removing/installing the carrier rails
Removing/installing the lateral carrier rail and fixing wedges
The variable loading floor makes handling of bulky items of luggage easier.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The room under the variable loading floor can be used to stow objects.
67.
» Fig. 67. To enlarge the boot, the
C
is carried out in the same way as behind the rear
15, Seat belt for the rear middle seat.
» Fig. 67, use
C
77
77
77
78