Fig. 170 Remove the middle part of the light/bulb arrangement
Read and observe
and
Bulb arrangement in the tail light
Brake light
1
Flashing
2
Reversing light
3
The rear fog light
4
Parking lights
5
Removing and installing the tail light
›
Open the tailgate.
›
Unscrew the light assembly
» Fig. 169
›
Grip the light in the upper and lower area and move backwards somewhat.
›
Unplug the connector
» Fig. 169
›
To access the bulbs, unscrew the middle of the light assembly and press off
the tabs
» Fig. 170
- .
›
To reinstall, screw the middle part of the light onto the housing of the rail
light.
›
Reconnect the plug connection and put the light into the original position.
›
Screw the light into place
Replacing the bulbs in the tail lamp assembly
›
Remove the faulty bulb
,
,
1
2
new bulb.
›
To replace the bulb, turn the bulb holder
and remove it from the housing.
›
Replace the bulb, insert the holder with the bulb into the housing and turn in
a clockwise direction to the the stop.
182
Do-it-yourself
on page 178 first.
» Fig. 170
- .
- .
or
» Fig. 170
from the holder and fit a
3
4
anti-clockwise up to the stop
5