Connect Phone - AT&T Home Base User Manual

STEP 1: Set Up Your Device
B
Turn on Your Device
1 . Plug the power cord into an electrical wall outlet.
2. Connect the other end of the power cord into the Power
Input port on the back of your AT&T Home Base.
3. Press and hold down the round On/Off button for 3 full
seconds until the power light stays steady green.
C
Check the Wireless Signal
Wait a few seconds for the signal strength light to turn on,
while your device connects to the cellular network.
Confirm signal strength light is green for optimal
performance. Yellow indicates a moderate signal and may
be sufficient.
NOTE: If you do not see a green light, you may want to
choose another location in your home, such as near a
window or outside wall.
6
(continued)
On/Off
Hold 3 seconds
Signal
Strength
Getting Started
STEP 2: Connect Your Phone
A
Unplug your Phone from the Wall Jack
The AT&T Home Base is not used with your home phone
wall jack.
NOTE: If you have a cordless phone, keep it plugged into a
power outlet.
B
Connect your Phone to the Device
Plug your phone into the "Phone 1" port on the AT&T Home
Base, using your existing phone cable or the included phone
cable.
NOTE: Do not plug the device into your home phone wall
jack.
Getting Started 7