Using Your Device; Calling; Making Calls; Three-Way Calling - AT&T Home Base User Manual

Using Your Device

Calling

Making Calls

Using a phone connected to your AT&T Home Base, place and
receive calls as you normally would. The AT&T Home Base supports
both cordless and corded phone dialing methods.
Note: Make sure to dial the 10-digit phone number, including area
code.

Three-Way Calling

While on an existing call, press the Flash (or Talk) key on your
phone to put the first party on hold. When you hear a dial tone, dial
the second party's number (wait up to four [4] seconds). When
the second party answers, press the Flash (or Talk) key again to
complete the three-way connection. If the second party does not
answer, press the Flash (or Talk) key to end the connection and
return to the first party.
Note: If your phone does not have a Flash (or Talk) key, use the off-
hook mechanism supported by your phone instead.

Call Waiting

You will hear two tones if someone calls while you are already on a
call.
To hold the current call and accept the waiting call, press the Flash
(or Talk) key. You can press the Flash (or Talk) key anytime to switch
back and forth between calls.
To clear the current call and accept the waiting call, enter "1" and
press the Flash (or Talk) key.
To reject (User Busy) the waiting call, enter "0" and press the Flash
(or Talk) key.
14 Using Your Device
Notes:
• Y our AT&T Home Base comes with standard three-way calling and
call waiting. Operation of these features will vary depending on
your home phone equipment.
• I f your phone does not have a Flash (or Talk) key, then use the off-
hook mechanism supported by your phone.

Call Forwarding

To forward all calls, dial:
1. *21*
2. The 10-digit number to which you wish to forward your calls
3. # key
(Example: *21*1234567890# forwards your calls to the phone
number 123-456-7890)
Please wait at least three (3) seconds and you hear a confirmation
tone for the forwarding to complete before hanging up.
To un-forward calls, dial #21#, please wait at least three (3)
seconds and you hear a confirmation tone for the un-forwarding to
complete before hanging up.
Note: Applicable wireless minute plan rates apply to forwarded calls.

Call Log

You can view incoming and outgoing calls placed to and from your
AT&T Home Base at att.com/myatt, or on the AT&T Home Base
Manager. To view call details on the AT&T Home Base Manager, enter
http://att.homebase directly into your browser address field on
any device that is connected to your AT&T Home Base. Log in using
"attadmin" (or your customized login) and go to Call Log.
Using Your Device 15