AT&T Mobile Hotspot Quick Start

Quick Start
WPS
microSDHC ™
button
Touch Micro USB SIM card cover/
screen
charging port reset button
AT&T Velocity

Connect to the Internet

Turn on your Mobile Hotspot
Press and hold the Power Button for
2 seconds.
On your laptop or other Wi-Fi devices
Find your hotspot's network name in your
laptop's list of available wireless networks.
Select the Wi-Fi
network name
ATT-WIFI-2388,
and then click
Connect.
Input the
password.
Launch your
browser.
Notes:
• The hotspot's home screen displays the
Wi-Fi network name and password.
• If needed, press the Power Button to
wake the hotspot, then tap and hold the
unlock icon.
Set Up Your Mobile Hotspot
Install the battery
Remove the back cover.
Power Insert the battery.
button
Replace the back cover.
Insert a microSDHC
card (optional)
Open the card slot cover.
Insert the microSDHC
card into the slot.
Close the cover.
Charging the battery
The battery is pre-charged. To recharge,
attach the USB cable to the hotspot and
connect to:
• A wall socket, using
the wall charger
(fastest option).
• The USB port on
your laptop.
Notes:
• Supports up to a 32GB microSDHC card.
• SIM card pre-installed in mobile hotspot.
Change Wi-Fi Network
Name and Password
On your connected Wi-Fi device, log
in to the web UI configuration page
by visiting http://attwifimanager or
http://192.168.1.1.
The default login is attadmin.
Select Settings > Wi-Fi in the left-side
menu.
In Main Wi-Fi Network or Guest Wi-Fi
SSID info section, select each item you
want to change.
Type your new Wi-Fi network name and
password.
Click Apply.
Note: If you change the network name or
password, you may need to reconnect
your other devices to Velocity.

Home Screen

New message
Network indicator
Signal strength
®
Wi-Fi
network
name &
password
Tap for
usage details
Tap for WPS, Guest
Wi-Fi, and other
options
Tap to view messages
Tap to change display,
file sharing mode, and
other settings
Customizable data alert
Guest Wi-Fi
Provide one-time access to your mobile
hotspot with a second guest network
and second password.
From the home screen, tap Wi-Fi >
Guest Wi-Fi Network.
Tap Turn on. The current (default)
guest Wi-Fi network name and
password appear.
Users can now connect using the Guest
Wi-Fi network name and password.
Notes:
• The Guest Wi-Fi network is turned off
when the hotspot is restarted.
• A total of 10 devices can connect, split
between Main and Guest Wi-Fi.
Battery
P/N 079584506622