Dmz; Advanced; Administrator - AT&T Home Base User Manual

Firewall - DMZ
The DMZ, or De-Militarized Zone, is a selected internal IP address
of a device that allows full access and connectivity from outside
traffic, through the firewall, to a specific internal device without
being filtered or blocked by the AT&T Home Base.
DMZ Settings: You may choose to enable or disable the DMZ
setting here. DMZ is set to Disabled by default.
DMZ IP Address: Enter the internal IP address of the desired device
that will be directly accessible from outside the firewall.
42 Device Configuration

Advanced

Advanced - Administrator
This page allows you to change the default login (attadmin) that is
used to access the AT&T Home Base Manager.
Current Login: Enter the current login for the AT&T Home Base
Manager in this field. The default login is "attadmin."
New Login: Enter the new login, using only letters, numbers, and
standard punctuation symbols. The password must be at least four
(4) characters long. The maximum length is 32 characters.
Verify New Login: Re-enter the new login in this field, then click
"Apply."
Note: Once you change the default login, there is no way to retrieve
the new
login. You must reset the AT&T Home Base to its factory settings to
restore the login to the default login "attadmin." Remove the bottom
cover of your AT&T Home Base and using a ballpoint pen, press and
hold the RESET button for
eight (8) seconds.
Device Configuration 43