Spacing For Mounting Of Inverters (Indications In Mm) - Platinum 4300 TL Installation And Operating Manual

PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Mounting
14
Installation and operating manual: PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Version 05/2010
Mat. No. 734 559-AB
Inverter
³ 150
Fig. 5

Spacing for mounting of inverters (indications in mm)

Mount inverters as follows:
Observe a minimum distance of 50 cm to the floor.
Slide cooling element of the inverter into the mounting fixture 2.
Use the outer cooling fins as guides in mounting fixture 2.
Hold the inverter at molded grips 7 and push up until mounting
bolts 5 drop into slotted pieces 4 on both sides.
Let down the inverter.
Mounting bolts 5 are seated in the slotted pieces.
Verify that minimum distances are kept (see Fig. 5).
Verify that the inverter is hanging in the mounting fixture
correctly.
Secure the inverter by inserting and tightening the locking screw
6 in the marked position (paper strip).
Ensure that the locking screw 6 is accessible for the dismounting
of the inverter.
³ 150
255