Start Up; Start Screen - Platinum 4300 TL Installation And Operating Manual

PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL

Start Up

Note
Note
Note
26
Installation and operating manual: PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Version 05/2010
Mat. No. 734 559-AB
6 Start Up
Independent of demand, the inverter activates the fan as soon as
power input is started (e.g. every morning). When feeding in, the
inverter activates the fan as required.
During the startup, several basic settings such as language selection,
date and time settings are set.
In order to transfer all settings correctly, it is necessary to do one
complete startup.
If several inverters are installed which are networked via the EIA 485
interface, the startup can be carried out at any one of the installed
inverters (master programming). This inverter transmits the
configuration settings to all other inverters in the network. Every
inverter is automatically assigned a number at its initial startup. The
free allocation of this number is possible in a further step.
The inverters that are not used for input entries display other screen
contents depending on the menu. If no entry is possible, the inverter
shows the start screen.

Start screen

If any input has been entered in the inverter, the inverter shows the
start screen after a restart.
All inverters that are not operated during the configuration will show
the blocking screen.
If parameters of the inverter have been adapted to special
requirements of the energy supplier, this is indicated on the start
screen.