PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Network connection
1
2
Fig. 11 Network layout
(1) Termination option for engaging the terminating resistor
(2) EIA485 bus line
Material damage due to interchanged lines!
Ensure that lines A and B are allocated correctly.
Use exclusively CAT-5 cables with twisted lines and
shielding.
Warning
Establish connection to network as follows:
Establish connection between inverters or inverters and
monitoring devices on serial interface EIA485 using a cable with
RJ45 plugs or cable on terminal connector (connection A and B)
(see Fig. 9).
For lines without RJ45 plugs, connect lines A and B in RJ45 plugs
on connectors A and B.
Installation and operating manual: PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Version 05/2010
Mat. No. 734 559-AB
1
Mounting
23