Connection Of The Inverter - Platinum 4300 TL Installation And Operating Manual

PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
5.4

Connection of the inverter

Danger to life due to high AC voltage!
Switch off the mains power supply (AC side) before
connecting the inverter (fuse).
Connect the inverter exclusively to TN or TTmains
Danger
(see IEC 60364-1) with 230 V.
Maximum allowed fuse on alternating voltage side:
40 A.
Danger to life due to high DC voltage!
Prior to connecting the inverter, verify that voltage is
applied to the generator-side DC terminal.
Prior to connecting the inverter, verify that the DC
Danger
voltage polarity is correct.
Wear insulating protective clothing and face
protection if there is voltage present at the DC input.
Remove DC cable exclusively if inverter is out of
operation.
Risk of burns due to hot surfaces!
After a longer operation with high power, housing
temperatures of > 60 °C are possible.
Do not touch hot surfaces.
Caution
Material damage due to DC plug connectors that don't
fit!
Use exclusively DC cable connectors and DC
receptacles of the same type and manufacturer.
Caution
Make sure that cable connector in latched in
receptacle correctly.
Installation and operating manual: PLATINUM Inverter 4300 TL, 4800 TL, 5300 TL, 6300 TL, 7200 TL
Version 05/2010
Mat. No. 734 559-AB
Mounting
15