The Log Menu - Simrad EY500 Instruction Manual

2.7 THE LOG MENU

The purpose of the Log Menu is to set the intervals between each final
calculation of Sa and TS values. The intervals can be based on pings, time or
distance.
A log distance counter is displayed at the bottom of the menu and is active only
in SPEED mode.
Note that during a log interval it is possible to set the mode to OFF and then
initiate outputs of the log result. This is useful when uneven distance intervals
are needed.
Mode
P3402/C
Log Menu
Mode
Ping Interval
Time Interval
Dist. Interval
Distance
Options:
OFF
PING
TIME
SPEED
REPLAY
The log mode is either OFF, based on PING or TIME
interval, or SPEED (set in the Navigation Menu) or
REPLAY. The log mode must be in any position but OFF
in order to get Sa and TS tables. Also the TS distribution
bar chart in the TS detection menu needs the log to be
operative. Common for all intervals in the Log Menu is
the end of a measuring period and the calculation of Sa
and TS tables.
In REPLAY, the speed information is filtered from the
file being replayed.
Simrad EY 500
Off
100
60 sec
1.0 nm
0.0
49