Table of Contents
Advertisement
Operation
Max. Phase Dev
58
Options:
0.0 to 10.0 in steps of 0.1.
Average electrical phase jitter between samples inside an
echo pulse must not exceed the max phase deviation
setting where max phase deviation is set in units of
phase steps (64 phase steps = 180 electrical degrees).
This parameter controls one of several mechanisms for
isolating echoes from single fish. Recommended setting
is 2 - 3 for normal conditions. For weak echoes in noisy
conditions one should allow more jitter (4 - 10).
P3402/C
Advertisement
Table of Contents
