The Printer/Echogram Menu - Simrad EY500 Instruction Manual

2.4.1 The Printer/Echogram Menu

This menu is identical to the DISPLAY/Echogram Menu except for SCOPE in
the PRESENTATION submenu. For the other menu descriptions, refer back to
paragraph 2.4.1 The DISPLAY/Echogram Menu. Also refer to the description of
the printer echogram in paragraph 1.2.4
Presentation
P3402/C
PRINTER/Echogram Menu
Transd. Number
Range
Range Start
Auto Range
Bottom Range
Bot. Range Start
Bot. Range Pres.
Sub. Bottom Gain
Presentation
TVG
Scale Lines
Bot. Det. Line
Layer Lines
Integration Line
TS Colour Min.
Sv Colour Min
Options:
NORMAL, WH. LINE and CONTOUR as in the
DISPLAY/Echogram Menu.
SCOPE presentation is intended for special purpose studies
of the echo return and causes an oscilloscope-like plot of a
single ping to be printed. Echo amplitude and directional
angles are plotted; echo amplitude in units of dBW (referred
to the transducer terminals) and directional angles in units
of phase steps (64 phase steps = 180 electrical degrees). The
plot starts at the upper depth boundary of the super layer,
and a total of 300 samples (basic hardware sampling rate of
transceiver) is plotted. Note that no echogram is plotted
during the printout period. Refer to figure 4.
Simrad EY 500
1
100 m
0 m
Off
10 m
5 m
Off
0.0 dB/m
Normal
20 log R
10
On
Off
Off
-50 dB
-70 dB
39