Table of Contents
Advertisement
(9)
Navigation data.
For navigation data on the printer a connection between the navigation serial
port and the navigation instrument must be established. The navigation
interval must be greater than 0 in the Printer Menu. If the navigation telegram
sent to the EY 500 is decoded successfully, the navigation data will be written
across the echogram paper. The output rate is controlled by the navigation
interval parameter setting in the Printer Menu.
10)
Bottom range echogram.
As for display echogram, except that this echogram is controlled from the
PRINTER/Echogram Menu.
11)
Integration line.
As for display echogram, except that the integration line is controlled from the
PRINTER/Echogram Menu.
12)
Scale lines.
As for display echogram, except that the scale lines are controlled from the
PRINTER/Echogram Menu.
(13/14) Range and identification fields.
The range and identification fields will always be enabled. The fields will be
printed each time the range is changed, and regularly three to four times per
page (A4-format) The range information will be written across the paper on top
and bottom of the echogram with the corresponding upper and lower depth
values given as whole numbers in meters.
The identification field will carry the following two echogram identifiers:
1.
TVG-type
2.
Min colour sensitivity value (no minus sign)
The identification field is placed close to the lower depth range field on the
bottom of the echogram, and it represents the major information reference for
the echogram.
P3402/C
(Sv or TS)
Simrad EY 500
15
Advertisement
Table of Contents
