2.2 THE OPERATION MENU
The Operation Menu is used to activate the sounder, to choose if the sounder is
to start pinging immediately after being turned on and to set the time interval
between pings.
Ping Mode
Ping Auto Start
P3402/C
Operation Menu
Ping Mode
Ping Auto Start
Ping Interval
Options:
OFF
NORMAL
EXT. TRIG
REPLAY
At power on this parameter is OFF implying that the
sounder is not activated. Normal operation occurs when
this parameter is NORMAL, provided the transceiver is
in the ACTIVE mode. When Ping Mode is set to
REPLAY, the file selected in the Disk Menu will be
replayed. EXT. TRIG provides synchronization with
other equipment. This operation requires special
hardware supplied by Simrad. Refer to drawing Ext.
sync. cable plan in section 7 in this manual.
Options:
OFF
ON
After power on, it will normally be necessary to enter the
Operator menu and set PING MODE to NORMAL to
start pinging. If PING AUTO START is ON and PING
MODE is set to NORMAL, the sounder will start pinging
automatically when the power is turned on.
Simrad EY 500
Off
Off
0.0 s
27