Service Search Mode - Uniden UBC125XLT Owner's Manual

Press and hold L/O until Confi rm Unlock All Channels?
2.
appears in the display.
3. Press Pgm/E to unlock all or . Clr to cancel.

SERVICE SEARCH MODE

If you do not have a reference to frequencies in your area, use
a search to fi nd a transmission. You can search for Emergency,
Freenet, PMR, Marine, Aircraft, CB radio and HAM radio
frequencies without knowing the specifi c frequencies used
in your area. The scanner is preprogrammed with all the
frequencies allocated to these services.
To start a Service Search, press Func then Srch/Svc. When
the scanner fi nds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting (see page 50).
During a Service Search, the upper line displays the current
service name. The lower line displays the search frequency and
the direction indicator (↑or ↓) with the modulation.
Enabled service banks appear on the lowest line. Disabled
service bank numbers are not displayed. The currently searched
bank number fl ashes. You can turn service banks on/off by using
1-7; however, one service bank must always be enabled. If you
turn off all service banks, the scanner will display Nothing to
Srch.
If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn the
SCROLL CONTROL or press Func then Srch/Svc.
45