Operation
Selecting A Channel
Press (ch)
or
or
the channel numbers will scroll rapidly.
05 and 35 are reserved for Emergency Calls.
NOTE
To Transmit And Receive
The radio uses the UHF-CB Channels.
(Channels 22 and 23 are for telemetry and telecommand
applications, channels 61,62 and 63 are for future use.
TX is inhibited on these channels.)
transmit power.
TX appears on the LCD during transmit.The unit cannot transmit continually for
the unit stops transmitting a signal. The TX icon and the Channel segment will
blink and sound a tone.
Hold the radio with microphone approximately 5 cm in front of your mouth with
the antenna at approximately 45° angle away from your head. Speak in a clear,
normal conversational voice.
disappears on the LCD. RX appears while receiving a signal.
Transmit Power Select
To change your transmit power level press hi/lo lock. To revert to the previous
UNIDEN UH510/UH515
to select the desired channel. If you press and hold (ch)
hi/lo lock
(PTT) for a response then TX
Model
Power - High
UH510
UH515
6
menu
Power - Low
UHF CB Radio