Selecting A Channel; Transmitting - Uniden X76 Owner's Manual

Remote speaker mic uhf cb transceiver
Table of Contents

Advertisement

Operation

Selecting a Channel

Press
/
channel.
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use is
printed on p.27 - p.29. For Australia, Channels 05 and 35
NOTE
are reserved for Emergency Calls.

Transmitting

The UHF CB Radio uses UHF-CB Channels.
For your reference a list of the available channels,
corresponding frequencies and guidelines for their use and
selection is printed on p.27 - p.29. For Australia, Channels
NOTE
05 and 35 are reserved for Emergency Calls.
Select the desired channel. Listen to the channel to make sure there is
no activity.
Hold the microphone approx. 7cm from your mouth.
Press the microphone's [PTT] button and speak in a normal volume
across (not into) the microphone.
Release the [PTT] button to end the transmission and listen for a reply.
UNIDEN X76
to select the desired
14
UHF CB Transceiver

Advertisement

Table of Contents
loading

Table of Contents