Set Close Call Bands; Close Call Alert - Uniden UBC125XLT Owner's Manual

Set Close Call Bands

This setting allows you to select the bands searched for all
Close Call modes.
Press Func then Hold to view the Close Call menu.
1.
Scroll to Close Call Bands and press Pgm/E.
2.
3. Scroll to each band you want to enable/disable and press
Pgm/E.
Scroll to select C-Call Band On or Off and press Pgm/E.
4.
• 25-88 VHF-Low-VHF Low Band (25 - 88 MHz)
• 108-137 Air - Air Band (108 - 137 MHz)
• 137-174 VHF-High - VHF High Band (137 - 174 MHz)
• 225-320 MIL-Air - Military Aircraft Band (225 - 320 MHz)
• 320-512 UHF - UHF Band (320 - 512 MHz)
• 806-960 800MHz - 800 MHz Band (806 - 960 MHz)
• Back - returns to previous menu.
Press .Clr (or scroll to Back and press Pgm/E) to return to
5.
the Close Call menu.

Close Call Alert

This setting controls the Alert Beep and Alert Light settings used
during Close Call operation. (Default = On for both)
Press Func then Hold to view the Close Call menu.
1.
Scroll to Close Call Alert and press Pgm/E. Select from the
2.
following options:
• Alert Beep - Controls whether the scanner sounds an
alert beep when Close Call detects a signal.
59