Pc Programming; Programming Channels - Uniden UBC125XLT Owner's Manual

PC Programming

Connect your scanner to your PC through the USB cable to:
• Program channels into the scanner
• Set any setting
When you connect your scanner to your PC, a series of screens
will appear to assist you.
USB drivers and optional programming software are available
for download from http://www.butel.nl/ubc125xlt . These will
also be available on the CD's with ARC125 Software.

PROGRAMMING CHANNELS

Now that you have confi gured your scanner, you are ready
to start using your scanner's preprogrammed service banks,
the custom search banks, the Close Call feature. You can also
program your channel memories or re-program your 10 custom
search bank memories.
Before the scanner can begin scanning, you must program a
frequency into at least one channel.
1. To select a channel, press Hold then enter the channel
number (1-500).
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Note 1: Turning SCROLL CONTROL in Function mode will
allow you to select the fi rst channel in each bank.
34