Service Search Receive/Hold Modes; Custom Search Mode - Uniden UBC125XLT Owner's Manual

Service Search Receive/Hold Modes

To hold on a frequency, press Hold. To step through the
frequencies, turn SCROLL CONTROL while in Hold mode. Press
Hold to resume.
While monitoring a transmission, the upper line displays the
current service bank name and the lower line displays the
channel number (if defi ned) and current frequency with the
direction indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
Numbers at the bottom of the display show the enabled service
search banks. The currently searched bank number fl ashes in
Receive mode.
To store a frequency, press Pgm/E. (see Storing Found Search
Frequencies on page 52.)
To temporarily lock out a frequency, press L/O.
To permanently lock out a frequency, press L/O twice quickly.
See also Search Options on page 50 for Delay, CTCSS/DCS
settings, and locking out/reviewing/unlocking frequencies.

Custom Search Mode

Custom Search mode lets you program and search 10
custom search ranges. You can search any of these ranges
simultaneously and reprogram each custom search range.
During custom search, the scanner searches starting with the
lowest frequency in the search range you select to the highest
frequency in the range.
46