Using The Keypad Lock; Setting The Beep Tone; Resetting The Scanner - Uniden UBC125XLT Owner's Manual

2000mAh
2100mAh
2200mAh
2300mAh
Note: The batteries will take longer to charge when the scanner is
in use.
4. Press . Clr to exit.

Using the Keypad Lock

Use the scanner's keypad lock to protect it from accidental
program changes. When the keypad is locked, only Func, Hold,
, , and SCROLL CONTROL (volume only) operate.
Press Func then L/O to toggle the keypad lock on and off . The
scanner displays Keypad Lock On or Keypad Lock Off.

Setting the Beep Tone

Press Func then Beep/7 (Default = ON) to toggle the keypress
confi rmation tone on or off .

Resetting the Scanner

WARNING: Resetting the scanner clears all data and settings
you have entered. You cannot restore user programmed
data that has been deleted. You can, at a last step,
restore only the original factory data.
1. Press and hold the 2, 9, and Hold keys and turn on the
scanner.
2. The scanner clears all data and returns to the initial setting
except the band plan. All Memory Clear displays.
12 hours
13 hours
13 hours
14 hours
33