Selecting A Channel; To Transmit And Receive - Uniden uh710sx Owner's Manual

UNIDEN Model uh710sx/uh720sx UHF CB Radio
OPERATION

Selecting A Channel

Press or
channel.
If you press and hold
numbers will scroll
rapidly.

To Transmit And Receive

The radio uses the 40 UHF-CB Channels.
For your reference a list of the available
channels and corresponding frequencies
is printed on page 25. (Channels 22 and
23 are for telemetry and telecommand
applications.
Transmit is inhibited on these channels).
1. The maximum RF transmit
power of the uh720sx is 2 Watts and
uh710sx is 1 Watt.
2. Before you transmit, listen
for activity on the selected
channel.
3. When the channel is clear,
press and hold the
transmit.
TX appears on the LCD.
Hold the radio with microphone approximately
5 cm in front of your mouth with the antenna at
approximately 45° angle away from your head.
Speak in a clear, normal conversational voice.
4. When you have finished speaking, release the
response then TX disappears on the LCD. BUSY appears while receiving
a signal.
to select the desired
or the channel
to
button
13
and listen for a