Color Frame Holder - ETC Source Four Zoom User Manual

C o l o r f r a m e h o l d e r
The color frame holder is equipped with a spring-loaded retaining clip that prevents color frames
and accessories from falling out. See
W A R N I N G :
Step 1: Release the retaining clip by pushing it sideways while gently pulling backwards.
Step 2: Insert the color frame.
Step 3: Lock the retaining clip by pushing sideways while gently pushing forward.
N o t e :
Basic Assembly
Figure
Make sure all color frame accessories are locked in position with the
retaining clip before hanging the Source Four.
The performance of saturated colors may be less than desirable in any theatrical
lighting fixture, especially when equipped with a 750w lamp. For best results,
always use high-quality color media rated for high-temperature use.
ETC's optional Gel Extender, part # PSF1029, will provide maximum color media
life. The use of any gel extender accessory may limit the coverage of any wide-
angle lens or beam setting.
A variety of heat shield products is also available from many color media
manufacturers. Follow the manufacturer's instructions for the use of these
products.
Retaining clip in the
locked position
2.
Figure 2
3