D1. Loading Filament - Flashforge DREAMER User Manual

D.
LOADING & UNLOADING FILAMENT
Filament must pass through the extruder and into the heating block in order to
be melted. In this user guide, we will demonstrate loading and unloading filament
using the left side extruder.
Loading Filament
1.
Remove the lid of the Dreamer
2.
From the main menu, press the right
[ Tools
icon labeled
3. [ Filament ]
Select
Dreamer User Guide | www.flashforge-usa.com
].
[ Load Left ].
and
19