C3. Installing Filament - Flashforge DREAMER User Manual

Installing Filament
The parts needed to complete this section of the hardware assembly include the
following:
• 2 Filament spool holder
• 2 Filament guide tube
• 2 Dreamer filament rolls (included in the box
Below shows the suggested path the filament should travel from the filament
spool to the extruder.
1.
Begin by loosening the filament guide
tube bracket on the back of the Dreamer
just enough so that it can move freely.
16
Dreamer User Guide | www.flashforge-usa.com