Using Sense - NEC Univerge SV8100 SL1000 Installation Manual

Using Sense

To Login to Sense, click the 'Calls' shortcut from the desktop of the call recording server. The default
username is 'admin' and password 'callrecorder'.
When logged into Sense, you will see a list of calls that have been recorded and some details about
the calls. To playback a call using Sense, double click on the call from the list and it will be played
back. This is usually done using the MyCalls interface but it maybe neccesary to review the call list in
Sense to confirm call recording is working as expected. Its important to establish with SIP calls that
the direction of the call is correct, SIP calls can be identified as being listed with 'Box' number 129 and
as having a comment stating the codec used for the call. If the direction of SIP calls show incorrectly,
then it may be necessary to review the VoIP call recording configuration. Its possible to make calls
and click the refresh button in Sense, this will allow you to see live call information to verify call
recording is working. Live calls are highlighted in yellow in Sense.