Table Of Inputs And Outputs - Axia iQ Installation & User Manual

Table of Inputs and Outputs

Main Outputs
Program 1
Program 2
Program 3
Program 4
Program 4 Record
Program 4 Phone
(internal bus only)
V-Mixer
V-Mode
Monitor-related Outputs
CR Monitor
CR Headphone
Studio Monitor
Studio Headphone Talent
Studio Headphone Guest
Preview
Talk to External
Talk to CR Audio
Monitor-related Inputs
External Preview Input
External Monitor Input 1
External Monitor Input 2
Source Inputs
Microphone Input n
Analog Line Input n
Digital Line Input n
Source-related Outputs
Feed-to-Source A n
Feed-to-Source B n
Type Comments
Stereo Main stereo bus (Usually referred to as Program)
Stereo Second stereo bus (Sometimes referred to as Audition)
Stereo Third stereo bus (Sometimes referred to as Utility)
Stereo Fourth stereo bus (Sometimes referred to as Auxiliary)
Stereo Fourth stereo bus variation (post fader, pre on/off)
Stereo Fourth stereo bus variation (pre fader, pre on/off)
Stereo Stereo Submix - sum of five stereo sources
Stereo Used for processing MONO sources and creation of MONO streams
Type Comments
Stereo Control room monitor speakers, source and level controlled by Monitor 1 control
Stereo Control room (board op) headphone, source and level controlled by headphone
control
Stereo Studio monitor speakers, source and level controlled by Studio Monitor control
Stereo Studio (talent) headphones, source same as main, fixed level output, with
talkback
Stereo Studio (guest) headphones, source same as main, fixed level output, no talkback
Stereo Allows the connection and level control of external powered speakers.
Mono Allows board operator mic to talk to other devices, a logic command is associated
Mono Allows the Talk to CR audio mix to drive an external destination
Type Comments
Stereo Allows an external path into the preview speakers, a logic command is associated
Stereo Allows an external source to be monitored by CR or studio selectors
Stereo Allows an external source to be monitored by CR or studio selectors
Type Comments
Mono Typical installations have 2 microphone sources per studio
Stereo Typical installations have 4-8 analog line sources per studio
Stereo Typical installations have 2-4 digital line sources per studio
Type Comments
Mono Mono mix-minus output feeds the left side of a stereo connection. "Talk to..."
function enabled.
Mono Mono mix-minus output feeds the right side of a stereo connection. "Talk to..."
function disabled.
© 2014 Axia Audio - Rev 1.3.1