Table of Contents
Advertisement
The process is complete: you've made a Source Pro-
file for your phone hybrid, created a mix-minus, mapped
it to an audio output, and associated a GPIO port for con-
tact closures associated with the source.
To confirm, choose the
iQ's fader strips and load your new Phone source. Now
press the
key just below the fader; you'll see the
Talk
status change appear in the display above the channel
to indicate that the operator's mic is talking to this tele-
phone hybrid through it's backfeed channel.
Now look at the GPIO screen on your browser. Note
the green indicators that have appeared on the port rep-
resenting your hybrid; switch the iQ channel On and Off
and you'll observe the tally change with the active pins.
What's Next
When you're ready, join us in Chapter 3: Console
Operation where we'll show you how to use the various
controls on the iQ mixing surface.
key on any of your
Options
© 2014 Axia Audio - Rev 1.3.1
Advertisement
Table of Contents
