Table of Contents
Advertisement
4.
allows the operator to listen
PREVIEW Key:
to sources before they air. iQ's
auditioning in full stereo. Individual source profiles
can change Preview to Solo (post-fader) operation.
The
key acts like a latching switch.
Preview
Momentarily pressing any channel's
assigns that channel to the Preview bus; pressing it
again removes the channel from Preview. To enable
an operator to quickly listen to various sources, the
Preview function can be interlocked: pressing
on any channel will remove any other channel
view
from Preview mode.
If you want to preview multiple channels, pressing
and holding any
Preview
the interlock; other sources can be added to the Pre-
view mix by pressing them. Conversely, channels
can be removed from a multiple Preview selection by
pressing and holding any lit
lecting the individual channels you wish to remove
Figure 3-1: iQ Main - Callouts
bus allows
Preview
key
Preview
Pre-
key temporarily disables
key and dese-
Preview
© 2014 Axia Audio - Rev 1.3.1
from Preview.
A momentary press of any lit
move all channels from Preview.
The interlock option for Preview can be disabled in
any Show Profile's Monitor section so that users can
gang preview sources without the need to press and
hold
.
Preview
The audio from the Preview bus feeds any speakers
dedicated to Preview, and can also be routed to the
operator's headphones and CR monitors if desired.
Preview speakers will be muted whenever and CR
microphone is
, or is assigned to the Preview bus.
ON
5.
Channel Information Display:
display interacts with the Channel Options control
and the Soft key. It is context-sensitive and can dis-
play many different parameters relevant to each fader.
key will re-
Preview
This OLED
Advertisement
Table of Contents
