GeoVision Surveillance system Installation Manual page 7

Connections (GV-2008)
For the GV-2008 Card, you can choose to install one or two GV-2008 Cards to meet your
different needs. Connect the D-Type video and audio cable to the GV-2008 Card. If
needed, connect the TV monitor to the GV-2008 Card.
When you install two GV-2008 Cards in a computer, you need to classify them as a master
and a slave card. Insert them to their own slots determined by the PCI slot IDs. Use the 6-
pin cable to connect the slave card to the master card. See Figure 1-3.
2
D-Type Video and
Audio Cable
Video 1~4
Audio 1~4
Video 5~8
Audio 5~8
2
2
D-Type Video and
Video 9-12
Audio Cable
Audio 9-12
Video 13-16
Audio 13-16
4
Figure 1-2 Connections of Two GV-2008 Cards
TV Monitor
GV-2008 Card (Master)
1
GV-2008 Card (Slave)
1
6
6-Pin Cable
(See the
next page)