Specifications - GeoVision Surveillance system Installation Manual

3. Use the drop-down list to select the camera for configuration.
4. In the fields of Video Resolution and Frame Rate Control, use the drop-down list to
select your changes. If you want to apply the same settings to all selected cameras,
click the finger button in each field.
5. In the field of Codec Select, use the drop-down list to select the codec. Note that
selected codec applies to all cameras. If you change the codec selection when you
configure another camera, the newly selected codec replaces the previous selection.
Note: The default settings are as follows: Record Quality is 3, Video Resolution is
720 x 480 (NTSC) or 720 x 576 (PAL), Codec is MPEG 4 (ASP) and Frame Rate is 30.

Specifications

Input Type
Video Input
TV Output
Audio Input
Recording Rate
Display Rate
Video Resolution
Compression
Format
GV-NET/IO Card Support
Dimensions (W x H)
GV-2004
DB 15 x 1
(for Video and
Audio)
4 Cams
RCA Connector x 1
4 Channels
S/W 120 fps (NTSC)
(CIF)
100 fps (PAL)
H/W 120 fps (NTSC)
(D1 or Half D1) 100 fps (PAL)
NTSC 120 fps
PAL 100 fps
NTSC 720 x 480, 720 x 480 (De-interlace)
PAL 720 x 576, 720 x 576 (De-interlace)
S/W Geo MPEG4, Geo MPEG4 (ASP), Geo H264
H/W MPEG-2, MPEG-4 (ASP)
Yes
195 mm x 102 mm
Video Capture Cards
1
GV-2008 GV-2008 x 2
DB 15 x 2 DB 15 x 4
(for Video and (for Video and
Audio) Audio)
8 Cams 16 Cams
8 Channels 16 Channels
240 fps (NTSC) 480 fps (NTSC)
200 fps (PAL) 400 fps (PAL)
240 fps (NTSC) 480 fps (NTSC)
200 fps (PAL) 400 fps (PAL)
240 fps 480 fps
200 fps 400 fps
240 mm x 102 mm
7