Making calls using network services
Initiating ringback during an external consultation call:
You wish to initiate an external consultation call during an external call. The line is
busy or there is no answer.
¢
§Options§
§End§
Please note
u
You can only activate one ringback at a time. If you activate a second ring-
back, the first one is automatically deleted.
u
The ringback is initiated on the previously used send connection.
u
The ringback can only be received on the handset that activated the ring-
back.
Accepting a waiting call
You are making an external call and hear the call waiting tone.
§Accept§
VoIP:
Once you have accepted the waiting call, you can switch between the two callers
("Call
swapping"
calling
(VoIP)"
Please note
u
Without CLIP, a waiting call is only announced with a signal tone.
u
An internal, waiting call is shown on the display. You can neither accept the
internal call nor reject it.
u
For instructions on accepting a waiting external call during an internal call,
¢
Rejecting a waiting call (VoIP)
You can hear the call waiting tone but do not want to speak to the caller.
§Reject§
The caller hears the busy tone.
Please note
You can also press the end call key a to end the current call, and then press
the talk key c again to accept the second call.
52
Ringback
Select and press
Press the display key to return to the party on hold.
Press the display key.
¢
page
53) or speak to both at the same time
¢
page
54).
page
117.
Press the display key.
§OK§
.
("Conference