Setting Pauses (Fixed Line); Switching Temporarily To Tone Dialling (Dtmf) - Gigaset N300 IP User Manual

Setting pauses (fixed line)

Changing the pause after line seizure
You can change the length of the pause that is inserted between pressing the talk
key c and sending the number.
v
*#Q5# L
~
Changing the pause after recall key
You can change the length of the pause if your PABX requires this (refer to the user
guide for your PABX).
v
*#Q5# 2
~
Changing a dialling pause (pause after access code)
v
*#Q5#
~
To insert a dialling pause: press and hold S for 2 seconds. A P appears in the dis-
play.

Switching temporarily to tone dialling (DTMF)

If your PABX still operates with pulse dialling (PD), but you need tone dialling for a
connection (e.g., to listen to the network mailbox), you must switch to tone dialling
for the call.
Prerequisite: You are conducting a call or have already dialled an external number.
*
After the call ends, pulse dialling is automatically reactivated.
Open the main menu.
Press keys in sequence.
Enter number for the length of the pause (1 = 1 sec.; 2 = 3 secs;
3 = 7 secs) and press
Open the main menu.
Press keys in sequence.
Enter a digit for the length of the pause (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and press
Open the main menu.
Press keys in sequence.
Enter a digit for the length of the pause (1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
Press the star key.
Connecting the phone to a PABX
§OK§
.
§OK§
.
§OK§
.
135