Configuring The System Settings; Setting The Date/Time - Gigaset N300 IP User Manual

Configuring the system settings

Your Gigaset comes preconfigured. You can change the settings via the menu on a
connected Gigaset handset, e.g. from a Gigaset C59H, C610H, SL78H, SL400H, S79H
or S810H. The following instructions are based on a Gigaset C59H/C610H handset.
Some settings can also be carried out via the phone's Web configurator
¢
( page

Setting the date/time

Date and time are required to show the correct time for incoming calls, for example.
There are two methods of setting the date and time:
u
Your base receives the date and time from a time server on the Internet, provid-
ing that the base is connected to the Internet and synchronisation with a time
server is enabled (default setting;
u
You can also change the date and time manually via the menu on one of the reg-
istered handsets.
Your base accepts the new time and transfers this information to the connected
handsets.
Setting the date and time on the handset
If the date and time have not yet been set on the handset, the
appears.
§Time§
Or:
¢
Ï Settings
v
¤
You can enter data in the following fields:
Date:
Enter the day, month and year as an 8-digit number via the keypad,
e.g., 4Q 2Q for 14/01/2011.
Time:
Enter the hours and minutes in 4-digit format via the keypad,
e.g., QM 5 for 07:15 am.
¤
Press the display key
136).
Press the display key.
¢
Date/Time
§Save§
to save the settings.
Configuring the system settings
¢
page 156).
§Time§
display key
119