Assigning Send And Receive Connections To Internal Parties - Gigaset N300 IP User Manual

Assigning send and receive connections to internal parties

If you have several connections configured for your telephone system, you can do
the following for each internal party:
u
Assign a send connection or allow the internal party to select the line for each
external call (select line).
u
Assign one or several receive connections. Only calls received via one of the
assigned connections are signalled on the device.
Assigning a send connection
Prerequisite: you have configured at least one VoIP connection on your phone.
¢ Ï Settings
v
A list of handsets is displayed.
q
r
§Save
Sel. at each call is only offered if more than one connection is configured.
If you select Sel. at each call, you can select the connection you want to use for each
call you make.
The Gigaset.net connection is not included in the selection for the send connec-
tions. Gigaset.net numbers (suffix #9) are automatically dialled via Gigaset.net.
Please note
If the send connection on a handset is deleted or deactivated, the fixed line con-
nection is assigned to it as the send connection.
¢
Telephony
Select the handset that should be assigned a new send connection and
press the display key
Choose Sel. at each call or a connection as the send connection. All
configured connections are displayed with the names you have set.
Press the display key to save the changes.
Configuring the system settings
¢
Send Connections
§OK§
.
127