Resetting the base to the default settings
The individual settings are reset.
Resetting the base station via the menu
When the settings are restored:
u
Handsets are still registered.
u
The system PIN is not reset.
The following settings in particular are reset to the default settings (you can make
the settings marked "*" via the Web configurator):
u
The entered VoIP connections (are deleted)
u
The assignment of send and receive connections
u
Audio settings for VoIP connections *
u
DTMF settings *
u
Own area code
u
Settings for the local network
u
The names of the handsets
u
SMS settings (e.g., SMS service centres)
u
Eco Mode and Eco Mode+ are deactivated
u
PABX connection settings
Digit and display key assignments as well as the
key
u
u
Settings for network services: call divert
u
Gigaset N300A IP: Answering machine settings and personal announcements
are deleted
The following lists are deleted:
u
SMS lists
u
Call lists
u
Answering machine lists (Gigaset N300A IP)
¢
Ï
v
~
§Yes§
After the reset, the base is restarted. The restart takes around ten seconds.
The installation wizard is launched
¢
¢
System
Base Reset
Enter the system PIN and press
Press the display key.
Configuring the system settings
§OK§
.
¢
(
page
16).
131