Repeater Support; Restarting The Base - Gigaset N300 IP User Manual

Configuring the system settings
•

Repeater support

You can increase the range and signal strength of your phone using a repeater. You
will need to activate repeater mode. This will terminate any calls that are in progress
at the time.
Prerequisite: Eco mode(+) is deactivated.
¢
Ï
v
§Change§
§Yes§
Please note
u
Repeater support and Eco Mode/Eco Mode+
other out, i.e., both functions cannot be used at the same time.
u
The default encrypted transmission setting is deactivated when repeater
mode is activated.

Restarting the base

When the handset is in idle status:
¢ Ï
v
The firmware for the base is then rebooted. This process takes about 20 seconds.
130
¢ ¢
System Repeater Mode
Press the display key to activate or deactivate repeater mode (³= on).
Press the display key to confirm the prompt.
¢ ¢
System Base Restart
¢
( page 110) cancel each