Number Assignment - Gigaset N300 IP User Manual

Assigning send and receive connections
For the number assignment, open the Web page:
¢
Settings Telephony
Assign send and receive connections to the registered handsets and receive con-
nections to the answering machines for the Gigaset N300A IP base.
Please note:
u
During registration, each handset is automatically assigned the fixed line con-
nection as a send connection and all base connections as receive connections.
u
You can assign each handset either a fixed send connection or a connection
selection. For connection selection, you choose the connection to be used for
each call.
u
The Gigaset.net number is fixed as the send connection for each registered
handset. Numbers that end in #9 are automatically dialled via Gigaset.net.
On the Gigaset N300A IP:
u
Once the new entry is made, each connection is assigned to integrated answer-
ing machine 1 as a receive connection.
u
Answering machines 2 and 3 are only activated if you have assigned each one at
least one receive connection. If an answering machine is not activated, it does
not appear on the answering machine list and you cannot activate it.
u
Each receive connection can only be assigned to one answering machine.
Please note
u
You can override the assignment of the send connection for certain phone
numbers by defining dialling plans for these numbers.
u
For number assignment
Activating the fixed line connection as the fallback send
connection
You can activate the fixed line connection on your phone as a fallback connection.
If a call attempt fails via VoIP, an attempt is automatically made (without prompting)
to establish a connection via the fixed line.
A fallback is used in the following situations:
u
Your VoIP connections are busy
u
The SIP server for the VoIP connection cannot be accessed
u
The dialled VoIP connection has not yet been configured or has not been con-
figured correctly (e.g., incorrect password)
u
The phone does not have a connection to the Internet, for example, because
your router is deactivated or not connected to the Internet.
Exception
SMS messages that are to be sent via a VoIP connection are not sent via the fall-
back connection.
The option to activate the fallback connection is on the Web page:
¢
Settings Telephony
Configuring the phone via the Web configurator
¢

Number Assignment

¢
page 127 and
¢
Number Assignment
¢
page 95.
151