Automatic Update For The Voip Provider Settings - Gigaset N300 IP User Manual

Configuring the system settings

Automatic update for the VoIP provider settings

After the first download of the VoIP provider settings, your phone will check daily
whether a newer version of the file for your VoIP provider is available from the Inter-
net on the configuration server.
Auto configuration has been used to download VoIP settings
¢
( page 16)
If there is new configuration data, this is automatically downloaded to your phone
(without notification).
Manual VoIP configuration with the VoIP wizard
If there is new provider data, the idle display on the handset displays the message
New profile available.
§Yes§
~
The new data for your VoIP provider will be downloaded and saved on the phone.
If you answer the prompt with
will not remind you of this new profile again. The message will only be shown again
if a newer version of the provider data is available.
A profile update will only be started if no other profile or firmware update is taking
place at the time.
126
Press the display key to confirm the prompt.
Enter the system PIN if necessary and press
§No§
, the phone returns to idle status. Your telephone
§OK§
.