Updating The Phone Firmware - Gigaset N300 IP User Manual

Updating the phone firmware

Prerequisite: the phone is connected to the Internet (i.e., connected to a router,
¢
page
If necessary, you can update your phone's firmware.
The firmware update is downloaded directly from the Internet by default. The rele-
vant Web page is preconfigured in your phone.
Prerequisite:
The phone is in idle status i.e.,
u
No calls are being made.
u
There is no internal connection between the registered handsets.
u
The base menu is not open in any of the handsets.
Starting the firmware update manually
¢ Ï Settings
v
Update Firmware
~
The phone establishes a connection to the Internet.
§Yes§
Please note
u
The firmware update can last up to six minutes, depending on the quality of
your DSL connection.
u
When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is termi-
nated and a message is issued to that effect.
Updating firmware automatically
Your phone will check daily whether a newer firmware version is available from the
Internet on the configuration server. If firmware updates are available, the message
New firmware available is displayed in the idle display of the handset.
§Yes§
The firmware is uploaded to your phone.
Please note
If the telephone is not connected to the Internet at the time when the check for
new firmware is to be performed (e.g., because the router is deactivated), the
check is performed as soon as the phone is reconnected to the Internet.
You can deactivate the automatic version check via the Web configurator.
12).
¢
System
§OK§
Select and press
Enter the system PIN and press
Press the display key to start the firmware update.
Press the display key to confirm the prompt.
Configuring the system settings
.
§OK§
.
129