Max 410/420/430 User's Guide
A. 3
Common configuration problems
In the Max Web Manager Network and Voice
Configuration page, I omitted the DNS server
field because it does not apply to me, but now
the Max Web Manager will not let me save the
settings.
•
The DNS fields must not be left blank. If you
do not wish to enter DNS Servers, you must
enter 0.0.0.0 in those fields.
In the Max Web Manager's Account
Configuration page, I accidentally checked the
"Use account for all fields" check box and saved
the changes. Now the different accounts I had in
each port are no longer present. How can I put
them back?
•
You must make sure the Use account for all
fields checkbox is unchecked, and enter the
account information again manually.
When I dial the extension that I routed to port 1,
it rings port 2, and when I dial the extension I
routed to port 2, it rings port 3, etc...
•
In the Routing Table Configuration page,
make sure you routed each extension to the
logical port number of the desired port, not
the labeled or physical port number. To find
the logical port number for each port, refer to
Section 4.5.1, Logical Port Numbering.
67